Prostormer 1HP Submersible Sump Pump for Clean/Dirty Water with Automatic Float Switch - 3700 GPH (Orange)

About this item

• The working principle of the water pump is that the float switch goes down vertically, the beads inside are stuck on the line under the float switch, and the water pump starts automatically
• Kindly Tip: When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape
• Multi Outlet Sizes: 3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be
• Automatic ON/OFF Mode: The float switch should be unlocked from the pump. When the water level rises above the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power
• Maintain Continuous Operation: When you set the float switch to the locked position on the sump pump, it will operate continuously. If the pump stops moving water, you must disconnect the power right away to avoid damaging the coil.
• 1 HP High Power: Prostormer Sump Pump uses 1 HP power, Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the time
• If you need the pump to work in a low water level environment (the water level does not exceed the pump), the float switch need to be locked on the pump
• Sealing Structure & Durable Construction: The sump pump features a durable sealing structure and the durable thermoplastic body keeps the pump from corrosion. The higher base plate which assures the prevention of debris collection in the sump pit