Prostormer 1HP Submersible Sump Pump with Auto Float Switch for Pool, Pond, Garden, and Flooded Areas (Orange)

About this item

• If you need the pump to work in a low water level environment (the water level does not exceed the pump), the float switch need to be locked on the pump
• Multi Outlet Sizes: 3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should be
• Kindly Tip: When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape
• 1 HP High Power: Prostormer Sump Pump uses 1 HP power, Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the time
• Keep Open Mode: When you put the float switch locked on the sump pump, the sump pump will keep working all the time. Once the pump can not pump any water, you should cut off the power immediately to prevent the coil from getting burned
• The working principle of the water pump is that the float switch goes down vertically, the beads inside are stuck on the line under the float switch, and the water pump starts automatically
• Automatic ON/OFF Mode: The float switch should be unlocked from the pump. When the water level rises above the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power
• Sealing Design & Robust Build: This sump pump is equipped with a sturdy sealing mechanism, along with a resilient thermoplastic housing that protects against corrosion. Additionally, the elevated base plate helps prevent debris accumulation in the sump pit.